Antar Electric Wheelchair AT52305, foldable

Electric wheelchair AT52305 - foldable

The AT52305 electric wheelchair was specially developed for people with limited mobility and disabilities who want to actively participate in daily life. This foldable wheelchair not only offers outstanding mobility, but also comfort and safety in a compact and lightweight design.

Technical specifications:

• Dimensions when unfolded: 950 x 625 x 930 mm (length x Width x Depth)
• Dimensions after folding: 410 x 625 x 775 mm
• Net weight: 21kg
• Actual seat depth: 400 mm
• Sitzbreite: 430 mm
• Backrest height: 460 mm
• Backrest width: 400 mm
• Distance from footrest to seat: 465 mm
• Distance from footrest to floor: 90 mm
• Maximum speed: ≤ 4.5 km/h
• Maximum user weight: 100kg
• Batterie: 24V 6Ah*1
• Range: 10km
• Motor specifications: 24V 150W*2
• Front wheel: non-pneumatic tire, outer diameter 150 mm
• Rear wheel: non-pneumatic tire, outer diameter 270 mm
• EAN: 5901571481043

Electric Wheelchair Features:

• Classification according to the type of protection device against electric shock: the wheelchair is connected to an internal power source.
• Classification according to the level of protection against electric shock: the wheelchair belongs to the applied part type B.
• IPX0 classified according to the level of protection against liquid ingress.
• Classification of the safety level of a highly flammable anesthetic gas mixed with air or oxygen or nitrous oxide: devices other than AP or APG.
• Classification according to the mode of operation: continuous operation.
• Rated voltage and frequency of the wheelchair: Direct current (DC) 24 V.
• Energy supply for the wheelchair: integrated system for energy supply.
• The wheelchair is not equipped with a discharge protection device.
• The wheelchair has no signal output or input elements.
• The device is suitable for permanent or non-permanent installation: mobile device.

Use and operation

• The control unit is integrated into the armrest and connected to the electrical box, motor and battery.
• The power switch allows power to be supplied to the control system, which transmits power to the motor.
• The wheelchair should not be stopped using the power switch unless it is an emergency situation.
• The control unit allows you to control the direction and speed of the wheelchair.
• Tilting the control unit from the inside accelerates the wheelchair, while moving it in the opposite direction slows down the movement.
• An automatic return to the starting position and a braking process take place when the control unit is released.
• The beep button produces an audible warning tone.
• The speed reduction button and acceleration button allow you to adjust the driving speed.

A notice: The charging socket is intended exclusively for charging the wheelchair and must not be used as a power source for other electrical devices in order to avoid damage or impairment of the wheelchair's efficiency.

Instructions for use etc.

• Instructions for use AT52305 in PDF
• Safety data sheet
• CE LOL